Sony HT-DDW5500 Home Theater System User Manual


 
73
GB
Additional Information
3)
Reference power output for front, center, surround
and surround back speakers. Depending on the
sound field settings and the source, there may be
no sound output.
Inputs
Analog Sensitivity: 800 mV/
50 kohms
Digital (Coaxial) Impedance: 75 ohms
Outputs (Analog)
AUDIO OUT Voltage: 800 mV/
10 kohms
SUBWOOFER Voltage: 2 V/1 kohm
Tone
Gain levels
±6 dB, 1 dB step
Reproduction frequency range:
28 – 20,000 Hz
FM tuner section
Tuning range 87.5 – 108.0 MHz
Antenna FM wire antenna
Antenna terminals 75 ohms, unbalanced
Intermediate frequency
10.7 MHz
AM tuner section
Tuning range
Antenna Loop antenna
Intermediate frequency
450 kHz
Video section
Inputs/Outputs
Video: 1 Vp-p, 75 ohms
COMPONENT VIDEO:
Y: 1 Vp-p, 75 ohms
P
B/CB: 0.7 Vp-p, 75 ohms
P
R/CR: 0.7 Vp-p, 75 ohms
80 MHz HD Pass Through
HDMI Video
4)5)
4)
The TV output resolution will depends on the
capability of TV and component.
5)
Not support Deep Color.
General
Power requirements
Power output (DIGITAL MEDIA PORT)
DC OUT: 5 V, 0.7 A MAX
System Control output
DC OUT: 5 V, 50mA MAX
Power consumption 200 W (STR-KM5500)
160 W (TA-KMSW500)
Power consumption (during standby mode)
0.3 W
Dimensions (width/height/depth) including
projecting parts and controls (Approx.)
Receiver 430 × 158 × 342 mm
Power amplifier 430 × 158 × 332 mm
Mass (Approx.)
Receiver 7.6 kg
Power amplifier 6.6 kg
Area code Tuning scale
10 kHz step 9 kHz step
AR, MX, E51 530 –
1,710 kHz
531 –
1,710 kHz
SP, TH1, SA 530 –
1,610 kHz
531 –
1,602 kHz
EA – 531
1,602 kHz
Area code Power requirements
SP, SA 230 – 240 V AC, 50/60 Hz
MX 127 V AC, 60 Hz
E51 120/220/240 V AC,
50/60 Hz
AR, TH1 220 – 230 V AC, 50/60 Hz
EA 120 – 127/220/230 –
240 V AC, 50/60 Hz
continued