Filter
Top Products
20
EN
Preparing and Using the Remote
3 Click the appropriate function.
4 Click “Sony” for a Sony product or OTHER for a
non-Sony product.
If the program source is a Sony product
The IR codes are programed automatically and
registration is complete (click RETURN or EXIT).
To take advantage of CONTROL-A1 compatible audio
components, such as multi-disc CD players, click
CONTROL-A1 to select CONTROL-A1.
5 Click the respective program source.
EXIT
OTHERMAKER
IR CODE SETTING
RETURN
Sony
OUTPUT IR
EXIT
OTHERMAKER
IR CODE SETTING
TAPE
DAT
TV
LD
CD
VCR
RETURN
MD
Sony
OUTPUT IR
EXIT
OTHERMAKER
IR CODE SETTING
TAPE
DAT
TV
LD
CD
VCR
RETURN
MD
Sony
START
OUTPUT IR
EXIT
VIDEO 1 Sony VTR3
Sony VTR1
Sony VTR2
TV/DBS
DAT/MD
Sony DAT
CD Sony CD1
TAPE Sony TAPE
Sony DBS
Sony LD
IR CODE SETTING
VIDEO 2
VIDEO 3
LD
RETURN
EXIT
– / – – 2 – CODE SET
RETURN
OTHER
TEST
VCR MAKER SETTING
PHILIPS
ZENITH
HITACHI
SHARP
GRUNDIG
SANYO
RCA
TOSHIBA
JVC
PANASONIC
GE
FISHER
AKAI
EMERSON
1 2
1 21 2 3 4
1 2
1 2
1 2
1 2 3 4
1 2
1 2
MISTUBISHI
1 2 3
If the equipment is not a video deck or laser disc
player
Cover the IR sensor on the equipment to prevent
accidental operation during the programing procedure,
click START, then go to step 6.
If the equipment is a video deck or laser disc player:
1 Click START.
A list of other manufacturers appears.
2 Click the manufacturer of the respective equipment
and the IR codes for that program source are
registered automatically. (If the manufacturer is not
listed, cover the IR sensor on the equipment to
prevent accidental operation during the programing
procedure, click “OTHER”, then go to step 6).
3 Click TEST.
If the selected program source turns on, it means the
IR codes have been registered. This ends the
procedure.
If the program source does not turn on, click the
number button beside the manufacturer’s name to
select another number, then click TEST again. If the
program source still does not turn on, cover the IR
sensor on the equipment to prevent accidental
operation during the programing procedure, click
“OTHER”, then go to step 6.
When using a video deck from another manufacturer
(Australian, Malaysian, and Singaporean models)
Check to see if the supplied remote uses -/-- or 1- and 2-
buttons to enter 2 digit TV channels.
Since the -/-- or 1- and 2- codes are not pre-
programmed in this unit, do the following operations to
program these codes manually.
1 Select the manufacturer (as shown in step 2 above).
2 Click -/-- 2- CODE SET.