Filter
Top Products
Chapter 1: Setting Up
6
1
3,5
2,4
flashing
flashing
flashing
flashing
Setting the Clock
The built-in clock shows the time in the
display even when the power is off.
Use the buttons on the unit for this
operation.
1 Press CLOCK.
2 Set the current hour by turning the JOG
dial until the correct hour appears.
3 Press ENTER/YES.
The minute indication begins flashing.
4 Set the current minute by turning the
JOG dial until the correct minute
appears.
5 Press ENTER/YES.
The clock starts running and the upper
dot flashes. Use the time signal to set the
clock accurately.
The upper dot flashes for the first half of
a minute (0 to 29 seconds), and the
lower dot flashes for the last half of a
minute (30 to 59 seconds).
To check the time while power is on
Press CLOCK.
The current time is displayed for 4 seconds.
To correct the clock setting
With the power turned off, repeat steps 1
through 5.
With the power turned on, press CLOCK
twice and repeat steps 2 through 5.