Filter
Top Products
Chapter 1: Setting Up
4
Chapter 1:
Setting
Up
Connecting the Stereo
Inserting the Battery
Setting the Clock
To set up the AM loop aerial
To improve the FM reception
Connect an outdoor FM aerial to the FM
75Ω terminal, using a 75-ohm coaxial cable
and IEC standard socket connector.
To improve the AM reception
After you connect the AM aerial, connect a
6- to 15-meter insulated wire to the AM
terminal. Connect the y terminal to earth.
Important
Ground the external aerial against lightning
from the y terminal.
To prevent a gas explosion, do not connect
the ground wire to a gas pipe.
Connecting the
Stereo
Use the illustrations below to connect your
stereo.
If you want to connect any optional
components to the stereo, see “Connecting
Optional Equipment” in Chapter 8.
Connecting the
Speakers (For MJ-L1 only)
Connect the right speaker to the SPEAKER
R connectors and the left speaker to the
SPEAKER L connectors with the grey cord
to ‘ (grey) and the black-lined cord to ’
(black).
Connecting the
Aerials
FM lead aerial connection
Connect the supplied lead aerial to the FM
75Ω terminal.
AM loop aerial connection
Connect the supplied loop aerial to the AM
and the y terminals.
y
FM 75
Ω
AM
STEP 1
STEP 2
R
L
Grey cord to ‘
(grey)
Black-lined cord to ’
(black)
FM 75
Ω
AM
y
IEC standard socket connector
(not supplied)
FM 75
Ω
AM
y
Insulated wire
(not supplied)
Ground wire
(not supplied)
FM 75
Ω
y
AM