Filter
Top Products
26
Specifications (continued)
General
Power requirements
North American models: 120 V AC, 60 Hz
European models: 230 V AC, 50/60 Hz
Australian models: 230 – 240 V AC,
50/60 Hz
Mexican models: 120 V AC, 50/60 Hz
Other models: 120 V, 220 V or
230 – 240 V AC,
50/60 Hz
Adjustable with voltage
selector
Power consumption
USA models:
MHC-RG4SR: 160 watts
MHC-RG30T: 115 watts
MHC-RG20: 95 watts
Canadian models:
MHC-RG30T: 115 watts
MHC-RG20: 95 watts
European model:
MHC-RG20: 85 watts
1.0 watts (at the Power
Saving Mode)
Other model:
MHC-DX10: 85 watts
Dimensions (w/h/d)
Approx. 280 × 325 × 421 mm
Mass
North American models:
HCD-RG4SR: Approx. 8.7 kg
HCD-RG30T: Approx. 8.2 kg
HCD-RG20: Approx. 7.8 kg
European model:
HCD-RG20: Approx. 8.1 kg
Other model:
HCD-DX10: Approx. 8.2 kg
Supplied accessories: AM loop antenna (1)
Remote Commander (1)
Batteries (2)
FM lead antenna (1)
Front speaker pads (8)
Design and specifications are subject to change
without notice.
Speaker
North American model:
Front speaker SS-RG4 for MHC-RG4SR
Speaker system 2-way, 2-unit,
bass-reflex type
Speaker units
Woofer: 13 cm, cone type
Tweeter: 5 cm, cone type
Nominal impedance 6 ohms
Dimensions (w/h/d)
Approx. 200 × 325 × 223 mm
Mass Approx. 3.1 kg net per
speaker
North American and European models:
Front speaker SS-RG20 for MHC-RG20
Speaker system 2-way, 2-unit,
bass-reflex type
Speaker units
Woofer: 13 cm, cone type
Tweeter: 5 cm, cone type
Nominal impedance 6 ohms
Dimensions (w/h/d)
Approx. 200 × 325 × 223 mm
Mass Approx. 2.9 kg net per
speaker
Front speaker SS-RG30T for MHC-RG30T
Speaker system 3-way, 3-unit, bass-reflex
type
Speaker units
Sub Woofer: 13 cm, cone type
Woofer: 13 cm, cone type
Tweeter: 5 cm, cone type
Nominal impedance 6 ohms
Dimensions (w/h/d)
Approx. 215 × 325 × 254 mm
Mass Approx. 4.0 kg net per
speaker
Surround speaker SS-RS60 for MHC-RG4SR
Speaker system Full range, bass-reflex
type
Speaker units
Full range: 8 cm, cone type
Nominal impedance 16 ohms
Dimensions (w/h/d)
Approx. 180 × 101 × 198 mm
Mass Approx. 1.0 kg net per
speaker
Other models:
Front speaker SS-DX10 for MHC-DX10
Speaker system 2-way, 2-unit,
bass-reflex type
Speaker units
Woofer: 13 cm, cone type
Tweeter: 5 cm, cone type
Nominal impedance 6 ohms
Dimensions (w/h/d)
Approx. 200 × 325 × 223 mm
Mass Approx. 2.9 kg net per
speaker