Filter
Top Products
16
Timer-recording radio
programs
You can record a preset radio station from a
specified time.
To timer-record, you must first preset the radio
station (see “Presetting radio stations” on page
12) and set the clock (see “Setting the time” on
page 9).
1 Tune in the preset radio station (see
“Listening to the radio” on page 13).
2 Press CLOCK/TIMER SET on the
remote.
“SET DAILY” appears.
3 Press . or > repeatedly to select
“SET REC”, then press ENTER on the
remote.
“ON” appears and the hour indication
flashes in the display.
4 Set the time to start recording.
Press . or > repeatedly to set the
hour, then press ENTER on the remote.
The minute indication starts flashing.
Press . or > repeatedly to set the
minute, then press ENTER on the remote.
5 Repeat step 4 to set the time to stop
recording.
The start time appears, followed by the stop
time, the preset radio station to be recorded
(e.g., “TUNER FM 5”), then the original
display appears.
6 Load a recordable tape into deck B.
7 Press ?/1 to turn off the system.
When the recording starts, the volume level
is set to minimum.
To Do this
Check the
setting
Press CLOCK/TIMER SELECT
on the remote and press . or
> repeatedly to select “SEL
REC”. Then, press ENTER on the
remote. To change the setting, start
over from step 1.
Cancel the
timer
Press CLOCK/TIMER SELECT
on the remote and press . or
> repeatedly to select “TIMER
OFF”, then press ENTER on the
remote.
Notes
• If the system is on at the preset time, the recording
will not be made.
• When you use the Sleep Timer, Daily Timer and
Timer-recording will not turn on the system until
the Sleep Timer turns it off.