Filter
Top Products
12
Programing CD tracks (continued)
Tuner
Presetting radio stations
You can preset up to 20 stations for FM and 10
stations for AM.
1 Press TUNER/BAND repeatedly to
select “FM” or “AM”.
2 Press and hold m or M (or TUNING –
or + on the remote) until the frequency
indication starts to change, then
release it.
Scanning stops automatically when the
system tunes in a station.
3 Press TUNER MEMORY on the remote.
A preset number appears in the display.
The stations are stored from preset number
1.
Preset number
4 Press ENTER on the remote.
“COMPLETE” appears.
The station is stored.
5 Repeat steps 1 to 4 to store other
stations.
To tune in a station with a weak
signal
Press m or M (or TUNING – or + on the
remote) repeatedly in step 2 to tune in the
station manually.
Tips
• The program you made remains after Program Play
finishes. To play the same program again, press CD,
then press H (or N on the remote).
• “--.--” appears when the total CD program time
exceeds 100 minutes, or when you select a CD track
whose number is 21 or over.
Using the CD display
You can check the remaining time of the
current track or the entire CD.
Press DISPLAY repeatedly.
During normal play
Playing time of the current track t Remaining
time of the current track t Remaining time of
current CD t Clock display (for eight
seconds) t Effect status
In stop mode
During Program Play mode when there is a
program:
The last track number of the program and the
total playing time t Total number of
programed tracks (for eight seconds) t Clock
display (for eight seconds) t Effect status