Filter
Top Products
20
EN
Additional Information
3-856-761-11(2)
Where purchased
General section
Power requirements
Specifications
System
Tape Digital audio tape
Recording head Rotary head
Recording time Standard: 120 minutes
(when using DT-120) Long-play: 240 minutes
Tape speed Standard: 8.15 mm/s
Long-play: 4.075 mm/s
Drum rotation Standard: 2,000 rpm
Long-play: 1,000 rpm
Track pitch 13.6 µm (20.4 µm)
Sampling frequency 48 kHz, 44.1 kHz, 32 kHz
Number of channels 2 channels, stereo
D/A conversion Standard: 16-bit linear
(quantization) Long-play: 12-bit non-linear
Frequency response* Standard: 2 - 22,000 Hz (±0.5 dB)
Long-play: 2 - 14,500 Hz (±0.5 dB)
Signal-to-noise ratio* 90 dB or more (Standard and long-play
mode)
Dynamic range* 90 dB or more (Standard and long-play
mode)
Total harmonic Standard: 0.005% or less (1 kHz)
distortion* Long-play: 0.008% or less (1 kHz)
Wow and flutter Below measurable limit (±0.001%
W.PEAK)
* During analog input with the SBM function off.
Input Connectors
Power requirements
U.S.A./Canada 120 V AC, 60 Hz
Europe 220 - 230 V AC, 50/60 Hz
Power consumption 30 W
Dimensions Approx 430 × 122 × 325 mm (w/h/d)
(17 × 4
7
/8 × 12
7
/8 inches)
Weight Approx 5.0 kg (11 lb 0.4 oz)
Remote commander RM-D9 (supplied)
Dimensions Approx 45 × 185 × 20 mm (w/h/d)
(1
13
/16 × 7
3
/8 ×
13
/16 inches)
Weight Approx 100 g (3.5 oz) incl. batteries
Supplied accessories See page 4.
Design and specifications are subject to change without notice.
SBM
(Super Bit Mapping)
Function
During analog recording, the SBM function lowers
noise within the frequency band to which to the human
ear is most receptive to noise, thereby, sharply
expanding the auditory dynamic range of the recorded
signal.
High-precision pulse A/D converter
The deck uses a pulse AD converter and decimation
filter to convert an analog signal into a quantized 24-bit
digital signal. The deck, like CD players, uses 16-bit
quantization, and thus the 8-bit difference results in
more precise quantization, more signal information
and less quantizing noise than 16-bit quantization.
During conversion of the 24-bit data to a 16-bit
recording signal, the SBM function boosts sound
quality by reintegrating 4 bits of signal information
that would normally be lost into the 16-bit signal.
DIGITAL
COAXIAL
DIGITAL
OPTICAL
Optical
connector
ANALOG
(LINE)
47 kilohms
Phono jacks
Connector
Jack type
Input impedance
Rated input level
Connector Load
impedance
Output
impedance
Jack type
ANALOG
(LINE)
10 kilohms
or more
DIGITAL
COAXIAL
HEADPHONES
DIGITAL
OPTICAL
—
Output Connectors
——
75 ohms
0.5 Vp-p
–4 dBs
Phono jack
Optical
connector
470 ohms
Phono
jack
Phono
jacks
75 Ω
Rated
output
level
–4 dBs
0.5 Vp.p
—
75 Ω
(wavelength
660nm)
100 ohms 1.2 mW 32 ohmsStereo
phone-plug
jack