Sony DAV-LF10 Home Theater System User Manual


 
Settings and Adjustments
89
GB
Note
Depending on the DVD, [4:3 LETTER BOX] may be
selected automatically instead of [4:3 PAN SCAN] or
vice versa.
x SCREEN SAVER
Turns the screen saver on and off. The screen
saver image appears when you leave the system
in pause or stop mode for 15 minutes, or when
you playback a CD, a Super Audio CD, an MP3,
or JPEG file (except during the slide show) for
more than 15 minutes. The screen saver will
help prevent your display device from becoming
damaged (afterimage). Press H to turn off the
screen saver.
x BACKGROUND
Selects the background color or picture on the
TV screen in stop mode or while playing a CD.
x COMPONENT OUT
This will change the type of signal output from
the COMPONENT VIDEO OUT jacks on the
system. See page 110, for more information
about the different types.
Notes
• Unless the COMPONENT VIDEO OUT/SCAN
SELECT switch on the rear panel of the subwoofer is
set to SELECTABLE, you cannot select the above
setting.
• [PROGRESSIVE] does not work for PAL signals.
*
Even if you set [COMPONENT OUT] to
[PROGRESSIVE], the output signal is automatically
switched to interlace format for PAL signals.
*
* Asian, Australian and Saudi Arabian models only.
To set to [PROGRESSIVE]
1 Select [COMPONENT OUT] in [SCREEN
SETUP] using X/x, then press ENTER.
2 Select [PROGRESSIVE] using X/x, then
press ENTER.
The display for confirming appears.
3 Select [YES] using X/x, then press ENTER.
The type of output signal changes to progressive
format.
ON
Turns on the screen saver.
OFF
Turns off the screen saver.
JACKET
PICTURE
The jacket picture (still picture)
appears in the background, but
only if a jacket picture is already
recorded on the disc (CD-
EXTRA, etc.). If the disc does not
contain a jacket picture, the
[GRAPHICS 1] picture appears.
GRAPHICS 1-5
A preset picture stored in the
system appears in the background.
BLUE
The background color is blue.
BLACK
The background color is black.
16:9
4:3 LETTER BOX
4:3 PAN SCAN
INTERLACE
Select this when you connect to a
standard (interlace format) TV.
PROGRESSIVE
Select this when you have a TV
that can accept progressive
signals.
SCREEN SETUP
SCREEN SAVER:
BACKGROUND:
TV TYPE:
PROGRESSIVE
JACKET PICTURE
INTERLACE
ON
16:9
COMPONENT OUT:
SCREEN SETUP
SCREEN SAVER:
BACKGROUND:
TV TYPE:
JACKET PICTURE
ON
16:9
YES
NO
Does your TV accept progressive
signals?
COMPONENT OUT:
continued