Filter
Top Products
Getting Started
21
GB
Setup for the system (for Asian and Australian models)
Setup is necessary for the system, depending on the TV to be connected.
The initial setting for Asian models is NTSC; Australian models is PAL.
If the colour system of the TV is PAL*
To set the system to PAL, turn on the system by pressing "/1 while pressing the X button on the
system. You need to hold the X button until “DAV-FC7” appears on the display. To reset to NTSC,
turn off the system and then turn on again using the remote while press and hold the X button on the
system, and turn the system off and then on again.
* If the colour system of the TV is NTSC, do the same operation above to set the system to NTSC.
To listen to the TV or game machine (ex: PlayStation 2) sound
by using the system
Connect the audio output jacks of the TV or game machine to the VIDEO 2 AUDIO IN jacks of the
system with the audio cords (optional).
S VIDEO
IN
INPUT
VIDEO
IN
INPUT
Y
P
B/CB
PR/CR
COMPONENT
VIDEO IN
VIDEO
IN
R
VIDEO
OUT
AUDIO
IN
AUDIO
OUT
L
VIDEO
OUT
R
AUDIO
OUT
L
OPTICAL
DIGITAL
OUT
AM
COAXIAL
FM
75
VIDEO OUTAUDIO OUT
SCAN SELECT
SELECTABLE
INTERLACE
VIDEO INAUDIO IN
RL
R
P
B
/C
B
P
R
/C
R
Y
L
VIDEO 2
VIDEO 2
MONITOR OUT
VIDEO 1
COMPONENT VIDEO OUT
SPEAKER
COMPONENT
VIDEO OUT
VIDEO IN
VIDEO
OPTICAL
DIGITAL
IN
S VIDEO
AUDIO IN
RL
CENTER FRONT LFRONT R
WOOFER SURR LSURR R
IN
INOUT
OUT
IN IN
OUT
TV
VCR
Digital satellite receiver or
PlayStation 2 etc.
TV with S VIDEO IN jack
TV with COMPONENT
VIDEO IN jacks