Filter
Top Products
10
GB
Getting Started – BASIC –
3 Pull the speaker cord out to a straight length of about 700 mm (28 inch). Fold back about
100 mm (4 inch) and twist together.
4 Draw the IR receiver cord first, and then the speaker cord through the hole on the base.
Stand the speaker up, and untwist and straighten out the speaker cord.
5 Secure the pedestal to the post with the screws.
About 100 mm (4 inch)
Speaker cord
Bottom of the base
,
IR receiver cord
Untwist and straighten out the speaker cord.
Screws with washer (long) (3)
(supplied)