Sony DAV-DZ531W Home Theater System User Manual


 
Other Operations
69
GB
* To use these buttons while in the TV mode (the TV
button lights up), press the TV button.
- is for selecting a channel number greater than
10. (For example, for channel 25, press -, then
2 and 5.)
Note
• Depending on the TV, you may not be able to control
your TV or to use some of the buttons above.
The TV mode turns off when you do not operate the
remote for 10 seconds.
THEATRE SYNC allows you to turn on your
Sony TV and this system, changes the system
mode to “DVD,” and then switches the TV’s
input source you set with one button push.
Preparing for the THEATRE
SYNC function
Register the TV’s input source connected to this
system.
Press and hold TV INPUT while entering the
code for the TV’s input source connected
to this unit (see the table) using the number
buttons.
The TV’s input source is selected.
If you successfully set the TV’s input source
code, the TV button flashes twice slowly. If the
setting is unsuccessful, the TV button flashes
five times quickly.
Set your TV’s input to the input you used to
connect the unit. For details, see the operating
instructions of your TV.
MUTING* Turn off the TV sound
temporarily.
C/X/x/c*, * Select the item on the menu.
By pressing You can
Using the THEATRE SYNC
Function
By pressing Number TV’s input source
TV INPUT 0 No input source
(Default)
1VIDEO1
2VIDEO2
3VIDEO3
4VIDEO4
5VIDEO5
6VIDEO6
7VIDEO7
8VIDEO8
9* COMPONENT 1
CLEAR* COMPONENT 2
PICTURE
NAVI*
COMPONENT 3
AUDIO* COMPONENT 4
SUBTITLE* HDMI 1
ANGLE* HDMI 2
VIDEO
FORMAT*
HDMI 3
cont
i
nue
d