Filter
Top Products
SETTING A NEW DSP SURROUND SOUND
IIVIANUALLY
The alements of the DSP SURROUND sound can be customized.
MIJLTIJOG
DELAY
EFFECT
l~AY (delav time)
Increasing the number in the display increases the delay time
and eurround effect. “15”,” 20”, “30, “50 or”1 40” mSec can be
selected.
To adjust the delay time
Press DELAY, and turn MULTI JOG to select one of the levels
within 4 seconds.
15e20*30e50-140
L-R, L+R [input mode)
When “L+R” is displayed, the surround effect increases,
especially in the center,
When “L-R” is displayed, it increases on the outside.
To select a input mode
Press EFFECT ~, and turn MULTI JOG to select “L-R” or
“l.+F-l”within 4 seconds.
~feedback level)
increasing the number in the display increases the echo,
A level from “OFF (0) to “~ can be selected,
To adjust the level of feedback
Press EFFECT w, and turn MULTI JOG to select one of
the levels within 4 seconds.
FBOFF_
lu2a-----6*7
,“,, “...’, #,, . ,8, ,,,, ,,. .. :!. ”:, ,,, ,, . 6?, .!!,,,.”, “L!, !,,,,,,. .’,’ $, P,,.’,. ~’”lll)$ Ji, @’lil*!$$
MEMORIZING THE NEW DSP SURROUND
SOUND
Up to 4 DSP SURROUND sound can be memorized as the
manual modes Ml - M4.
1
2
3
4
2,4
1,3
r-u-n,
Set a new DSP SURROUND sound with DELAY,
EFFECT, and MULTI JOG,,
Within 4 seconds, press ENTER.
“Ml” flashes on the display.
● If this step is not completed within 4 seconds, press
SURROUND first to display ‘ThSPON”, Then press ENTER
within 4 seconds.
Within 4 seconds, turn MULTI JOG to select one
of the manual modes Ml - M4.
Within 4 seconds, press ENTER.
The new DSP SUIRROUND sound is memorized,
To select the stored DSP SURROUND sound
Press SURROUND, and turn MULTI JOG to select one of the
manual modes Ml - Vf4 within 4 seconds
m
When the MIC or ECHO level is changed
SURROUND mode is automatically canceled.
(page 21), “the
ENGLISH
10