Sony CMT-U1 Stereo System User Manual


 
20
GB
CMT-U1.GB.2-683-463-11(1)
Using the Timers
e system oers two timer functions. If you
use the Play Timer with the Sleep Timer, the
Sleep Timer has priority.
Sleep Timer:
You can fall asleep to music. is function
works even if the clock is not set.
Press SLEEP
repeatedly. If you select
“AUTO,” the system automatically turns o
aer the current disc stops or in 100 minutes.
Play Timer:
You can wake up to CD, tuner or optional USB
device at a preset time.
Use buttons on the remote to control the Play
Timer. Make sure you have set the clock.
1
Prepare the sound source.
Prepare the sound source, and then press
VOLUME +/–
to adjust the volume.
To start from a specic CD track, “ATRAC”
le or MP3 le of a disc, create your own
program (page 18).
2
Press CLOCK/TIMER SET
.
3
Press /
repeatedly to
select “PLAY SET?,” and then press
ENTER
.
“ON” appears, and the hour indication
ashes.
4
Set the time to start playing.
Press /
repeatedly to set
the hour, and then press ENTER
.
e minute indication ashes. Use the
procedure above to set the minutes.
5
Use the same procedure as in step 4
to set the time to stop playing.
6
Select the sound source.
Press /
repeatedly until the
desired sound source appears, and then
press ENTER
. e display shows the
timer settings.
7
Press /
to turn off the system.
e system turns on 15 seconds before the
preset time. If the system is on at the preset
time, the Play Timer will not play.
To activate or check the timer again
Press CLOCK/TIMER SELECT
, press
/
repeatedly until “PLAY
SELECT?” appears, and then press ENTER
.
To cancel the timer
Repeat the same procedure as above until
“TIMER OFF” appears, and then press ENTER
.
To change the setting
Start over from step 1.
Note
You cannot perform Program Play of the les on an USB
device using the Play Timer.
Tip
e Play Timer setting remains as long as the setting is
not canceled manually.