Filter
Top Products
11
GB
Basic Operations
CMT-U1.GB.2-683-463-11(1)
Basic Operations
Playing a CD/ATRAC/MP3
disc
1
Select the CD function.
Press CD
.
2
Insert a disc in the disc slot
with
the label side facing forward.
Insert a disc with
the label side
facing forward.
Notes
• When you turn on the system, the disc is not
pulled into the disc slot until “No Disc” appears
in the display. Do not attempt to push in the disc
until “No Disc” appears.
• Do not insert a disc with non-standard shapes (e.
g., heart, square, star). The disc may fall into the
system and cause irreparable damage.
• When pressing on the unit and then reinserting
the disc that appears in the disc slot, do not simply
push in the disc. Remove the disc from the disc slot
and then reinsert it.
• Do not turn o the system with a disc halfway inserted
in the disc slot. Doing so may cause the disc to fall.
• Do not use a disc with tape, seals or paste on it as this
may cause malfunction.
• When you eject a disc, handle the disc by its edge. Do
not touch the surface.
• Do not push a disc into the disc slot when the system is
o. Doing so may cause the system to malfunction.
• Do not insert an 8 cm disc with an adaptor. Doing so
may cause the system to malfunction.
3
Start playback.
Press (or CD on the unit)
.
4
Adjust the volume.
Press VOLUME +/–
.
Other operation
To Press
Pause playback
(or CD on the
unit)
. To resume play,
press the button again.
Stop playback
.
Select a folder
on an “ATRAC”
disc or MP3 disc
+/– (or / on the
unit)
.
Select a track
or le
/
.
Select a folder
and le on an
“ATRAC” disc or
MP3 disc using
the buttons on
the unit
SEARCH
. Press /
to select the desired
folder, then press ENTER
. Press /
to select
the desired le, then press
ENTER
.
Find a point in a
track or le
Hold down /
during playback, and
release the button at the
desired point.
Select Repeat
Play
REPEAT
repeatedly
until “REP” or “REP1”
appears.
Eject a disc
on the unit.
Continued