Filter
Top Products
18
GB
CMT-U1.GB.2-683-463-11(1)
Other Operations
Creating your own program
(Program Play)
Use buttons on the remote to create your own
program.
1
Select the desired function.
CD
Press CD
to select the CD function.
USB
Press USB
to select the USB function.
2
Press PLAY MODE
repeatedly until
“PGM” appears while the system is
stopped.
3
Press /
repeatedly until
the desired track or file number
appears.
When programming les, press +/–
repeatedly to select the desired folder, and
then select the desired le.
Example: When programming tracks on
a CD
Selected track or file number Total playing time of program
(including selected track or file)
4
Press ENTER
to add the track or file
to the program.
CD
“– –.– –” appears when the total program
time exceeds 100 minutes for a CD, or
when you select a CD track whose number
is 21 or over, or when you select an
“ATRAC” le or MP3 le.
USB
e total program time cannot be
displayed, so “– –.– –” appears.
5
Repeat steps 3 through 4 to program
additional tracks or files, up to a total
of 25 tracks or files.
6
To play your program of tracks or
files, press
.
e program remains available until you
remove the disc or USB device. When using
an USB device, the program disappears
when the system is turned o. To play the
same program again, press
.
To cancel Program Play
Press PLAY MODE
repeatedly until “PGM”
disappears while the system is stopped.
To delete the last track or file of the program
Press CLEAR
while the system is stopped.