Sony CMT-HX70BTR Stereo System User Manual


 
CMT-HX70BTR/HX50BTR.GB.3-294-004-11(1)
37
GB
Others
Messages
CD/MP3 player, Tuner
Complete!: e preset operation ended
normally.
LOCKED: e disc tray does not open.
Contact your nearest Sony dealer.
No Disc
: ere is no disc in the system,
or you have loaded a disc that cannot
be played.
No Step
: All of the programmed tracks
or les have been erased.
Over: You have reached the end of the
disc while pressing
during
playback or pause.
Push STOP!
: You pressed PLAY MODE
during playback.
Reading: e system is reading
information of the disc. Some buttons
are not available.
Step Full!
: You tried to program more
than 26 tracks or les (steps).
TIME NG!
: e Play Timer start and end
times are set to the same time.
Bluetooth device
Connect: Bluetooth communication was
established.
Connecting: e system is attempting
to connect with recently connected
Bluetooth devices.
Disconnect: Communication with a
Bluetooth device was cut o for some
reason, or Bluetooth communication
was ended.
No Device
: A pairable Bluetooth device
was not found, or connection was not
possible.
Not in Use
: e system is not connected
with a Bluetooth device using A2DP, or
the Bluetooth device does not support
a command for selecting a folder
operations ( +/
).
PIN?: e system is asking for the
passkey. For details, see “Using the
Bluetooth function” (page 15).
Please Wait
: e system is readying for
usage of a Bluetooth device.
USB device
Complete!: e audio le or folder on
the USB device has been erased.
Device Full!
: e USB device is full.
Erase Error!
: Erase of audio les or
folders on the USB device failed.
Error: e USB device could not be
recognized or an unknown device is
connected (page 35).
Fatal Error!
: e USB device has been
disconnected while recording to or
erasing audio les or folders on the
USB device.
Folder Full!
: e number of folders
on the USB device has reached the
maximum.
No Device
: No USB device is connected
or the connected USB device has been
stopped.
No Step
: All of the programmed tracks
or les have been erased.
No Track
: No playable le is loaded in
the system.
Not in Use
: You have made an invalid
operation.
Not Supported
: An unsupported USB
device is connected.
Please Wait
: e system is readying for
usage of an USB device.
Protected!: You tried to record or erase
a write-protected USB device.
Reading: e system is recognizing the
USB device.
Rec Error!
: Recording did not start,
stopped partway, or otherwise could
not be performed (page 34).
Removed: e USB device has been
removed.
Step Full!
: You tried to program more
than 26 tracks or les (steps).
Storage Drive
: USB device is connected.
Track Full!
: e number of les on the
USB device has reached the maximum.