Filter
Top Products
16
GB
Using the on-screen display
Press REPEAT repeatedly during play.
Each time you press the button, the setting
changes cyclically as follows:
x When playing a DVD
• Off: does not play repeatedly.
• Title: repeats the current title on a disc.
• Chapter: repeats the current chapter.
x When playing a VIDEO CD/CD/MP3/JPEG
• Off: does not play repeatedly.
• All: repeats all the tracks/files on a disc.
• Track (except for JPEG): repeats the current
track.
• File (JPEG only): repeats the current file.
To cancel Repeat Play
Select “Off”.
Notes
• Depending on the DVD, you cannot perform Repeat
Play.
• You cannot perform Repeat Play during PBC
playback of VIDEO CDs (page 15).
• If you select “All”, the program repeats up to five
times.
• Repeat Play is canceled when:
– you turn off the system.
– you open the disc tray.
– you switch to other functions except DVD.
Tip
You can set Repeat Play when the playback is stopped.
Press REPEAT repeatedly to select the setting, then
press DVD N (or DVD NX on the unit) to start
Repeat Play.
You can make a program of up to 12 steps.
You can synchro record the programmed tracks
onto a cassette tape (page 29).
The program operation can only be set using the
TV screen.
1 Press DVD N (or DVD NX on the
unit) to switch the function to DVD.
Playback starts.
2 Press x twice to stop playback.
3 Press PLAY MODE repeatedly in stop
mode until the Program Display
appears on the TV screen.
4 Press M/m/</, repeatedly to select
the desired step number.
5 Press the number buttons to select the
track you want to program.
If you make a mistake, press CLEAR to
cancel the number, then select another
number.
6 To program other tracks, repeat steps 4
and 5.
7 Press M/m/</, repeatedly to select
“Play Program”, then press DVD N (or
DVD NX on the unit).
Program Play starts.
Creating your own
program
— Program Play
7
8
9
10
11
12
Track
All Clear Play Program
Program
1
2
3
4
5
6
7
8
9
10
11
12
Track
All Clear Play Program
Program
1 3
2
3
4
5
6