Filter
Top Products
8
GB
Setting the clock
1 Turn on the system.
2 Press CLOCK/TIMER SET on the
remote.
“CLOCK” appears.
3 Press . or > on the remote to set
the hour.
4 Press ENTER.
The minute indication flashes.
5 Press . or > on the remote to set
the minute.
6 Press ENTER.
The clock starts working.
Tip
If you make a mistake while setting the clock,
press x, then start over from step 2.
To adjust the clock
1 Press CLOCK/TIMER SET on the remote.
2 Press . or > on the remote to select
“CLOCK”, then press ENTER.
3 Do the same procedures as step 3 to 6
above.
Note
You cannot set the clock in the Power Saving Mode.
When you play
a CD single (8
cm CD), place
it on the inner
circle of the
tray.
3 Press Z again to close the disc tray.
CD
Loading a CD
1 Press Z.
The disc tray opens.
2 Place a CD with the label side up on the
disc tray.