Filter
Top Products
16
GB
Recording to a tape
— CD Synchro Recording/Recording Manually/Program Edit
You can record from a CD or radio (or connected components). You can use TYPE I (normal) tapes.
The recording level is adjusted automatically.
Steps Recording from a CD
(CD Synchro Recording)
Recording from a CD (or a connected
component) /radio manually
1 Load a recordable tape.
2 Press FUNCTION repeatedly to
select “CD”.
Press FUNCTION repeatedly to select the
desired source to record.
3 Load the CD you want to record.
Load the CD (or other audio source), or
tune in the station you want to record.
4 Press CD SYNC.
Press REC PAUSE/START.
The tape deck stands by for recording.
When you want to record on the bottom side, press TAPE nN.
5 Press TUNER MEMORY/DIRECTION repeatedly to select g to record on one
side. Select h (or j) to record on both sides.
6 Press REC PAUSE/START. Press REC PAUSE/START, and then start
playing the desired source.
To stop recording
Press x.
Note
You cannot listen to other sources while recording.
Tips
• When you record on both sides, be sure to start
from the top side. If you start from the bottom side,
recording stops at the end of the bottom side.
• For recording from the radio:
If noise is heard while recording from the radio,
move the respective antenna to reduce the noise.