Filter
Top Products
22
Timer
Falling asleep to music
— Sleep Timer
You can set the system to turn off after a
certain time, so that you can fall asleep to
music.
Press SLEEP on the remote.
Each time you press the button, the minute
display (the turn-off time) changes cyclically as
follows:
SLEEP OFF t AUTO* t 90min t 80min
t
…
t 10min
* The system automatically turns off after the current
CD or tape finishes playing (up to 100 minutes).
When the function is TUNER, the system turns off
in 100 minutes.
To Press
Check the
remaining time
SLEEP on the remote once.
Change the time
to turn off
SLEEP on the remote to select the
time you want.
Cancel the Sleep
Timer function
SLEEP on the remote repeatedly
until “SLEEP OFF” appears.
Note
Do not set to “AUTO” during Synchro Recording on
a tape.
Waking up to music
— Daily Timer
You can wake up to music at a preset time.
Make sure you have set the clock (see “Setting
the time” on page 8).
1 Prepare the sound source you want to
play.
• CD: Place a CD. To start from a
specific track, make a program (see
“Programing CD tracks” on page 11).
• Tape: Insert a tape.
• Radio: Tune in a station (see
“Listening to the radio” on page 15).
2 Turn VOLUME (or press VOL+ or – on
the remote) to adjust the volume.
3 Press CLOCK/TIMER SET on the
remote.
“DAILY SET ?” appears.
4 Press ENTER/YES on the remote.
“ON” appears and the hour indication
flashes.
5 Set the time to start playing.
Turn ./> (or press . or > on
the remote) to set the hour, then press
ENTER/YES on the remote.
The minute indication flashes.
Turn ./> (or press . or > on
the remote) to set the minute, then press
ENTER/YES on the remote.
6 Set the time to stop playing following
the procedure in step 5.