Filter
Top Products
Tuner
15
Listening to the radio
— Preset Tuning
Preset radio stations in the tuner’s memory first
(see “Presetting radio stations” on page 14).
1 Press TUNER/BAND repeatedly to
select “FM” or “AM”.
2 Turn ./> (or press . or > on
the remote) to select the desired preset
station (or station name* or RDS
station name**).
* The station name appears only if you have
labeled the station (see “Labeling the preset
stations” on the next page).
**European model only.
To Do this
Tips
• To improve broadcast reception, adjust the supplied
antennas, or connect a commercially available
external antenna.
• When an FM stereo program has static noise, press
STEREO/MONO repeatedly until “MONO”
appears. There will be no stereo effect, but the
reception will improve.
Turn off the radio Press ?/1.
Change the display Press DISPLAY repeatedly.
The display changes cyclically as
follows:
Frequency with station name*
t Clock display t Effect
name
* The station name appears when you label the preset
station (see “Labeling the preset stations” on the
next page) or the RDS broadcast is received (see
“Using the Radio Data System (RDS)” on the next
page).
Listening to non-preset radio
stations
• Press m or M in step 2. “MANUAL”
appears. Then press m or M to tune in
the desired station (Manual Tuning).
• Press and hold m or M until “AUTO”
appears in step 2. The frequency indication
changes and the scanning stops when the
system tunes in a station (Automatic
Tuning).
To cancel Automatic Tuning
Press m or M.