Sony CFD-E95L Cassette Player User Manual


 
30
GB
Remote
The remote does not function.
Replace all the batteries in the remote with
new ones if they are weak.
Make sure that you are pointing the remote at
the remote sensor on the player.
Remove any obstacles in the path of the
remote and the player.
Make sure the remote sensor is not exposed
to strong light such as direct sunlight or
fluorescent lamp light.
Move closer to the player when using the
remote.
After trying the above remedies, if you still have
problems, unplug the mains lead and remove all
the batteries. After all the indications in the
display disappear, plug the mains lead and insert
the batteries again. If the problem persists, please
consult your nearest Sony dealer.
Troubleshooting (continued)
Tape Player
The tape does not move when you press
an operation button.
Close the tape compartment securely.
The REC z button does not function.
The tape does not play.
Make sure the safety tab on the cassette is in
place.
The tape does not erase completely.
Clean the erasing head (see page 31).
Replace all the batteries with new ones if
they are weak.
The source which was recorded on TYPE II
(high position) or TYPE IV (metal) tape
using this unit is being played. Record on
TYPE I (normal) tape and play.
The tape does not record.
Make sure the tape is inserted properly.
Make sure the safety tab of the cassette is in
place.
The audio is weak.
The audio quality is poor.
Clean the heads, pinch roller and capstan (see
page 31).
Demagnetize the heads using a demagnetizer
(see page 31).
The sound is distorted.
The TYPE II (high position) or TYPE IV
(metal) tape is being used. Use TYPE I
(normal) tape only.
Timer
The timer does not operate.
Make sure the time on the clock is correct.
Check to see if the AC power had been cut
off.
Make sure the (clock) indication is
displayed.