Filter
Top Products
26
GB
Changing the backlight
colour in the display
The backlight in the display lights in three
(CFD-E95) or four (CFD-E95L) different
colours. You can change the colour for each
music source (CD, RADIO, TAPE or LINE).
1 Play the music source (CD, RADIO,
TAPE or LINE) you want to change the
backlight colour.
2 Press COLOUR (or COLOR) until the
display lights in the desired colour.
Changing the colour of the
backlight at random
Press COLOUR (or COLOR) for about 2
seconds. The colour of the backlight changes
automatically. To return the colour to the
one set before you pressed the button, press
it again for about 2 seconds.
COLOUR
(or COLOR)
Listening to TV, VCR and
MiniDisc player/recorder
*For MiniDisc recorder: a cable with a stereo-
mini plug on both ends.
For TV, VCR: a cable with a stereo-mini plug
on one end and two phono plugs on the other
end.
1 Open the cover of the MD LINK jacks
of this player and connect the LINE IN
jack with the line output jack of the
MiniDisc player or other component
using the audio connecting cable (not
supplied) .
2 Turn on the power of this player and the
connected component.
3 Press LINE and start playing sound on
the connected component.
The sound from the connected
component is output from the speakers.
Note
Connect the cords firmly to avoid any
malfunction.
Tip
You can record the sound of the connected
component. Insert a blank tape into the tape
compartment, and press z (page 11).
Connecting optional
components (continued)
TV, VCR, MiniDisc
player/recorder,
etc.
Rear panel of
this player
to LINE IN
jack
to line
output
jack
Audio
connecting
cable*(not
supplied)