Filter
Top Products
20
GB
4 Set the timer to the hour and the
minutes you want the music to go off.
(Do as step 3.)
5 Select the music source (“Cd” or
“RAdIO”) by turning the jog dial, then
press ENTER.
6 Turn the jog dial to set the volume, then
press ENTER.
7 Press STANDBY.
The
indication lights up and the
power goes off.
At the preset time, the power will go on,
and the music will play. Then the power
will go off at the preset time, and the
player will enter into the standby mode.
To check/change when the
playback will start
Press CLOCK/SLEEP/TIMER until
“TIMER” appears in the display, then press
ENTER. Each time you press ENTER, a
stored setting is displayed in the set order.
To change the setting, display the setting you
want to change and re-enter it.
Waking up to music
You can wake up to music or a radio
programme at a preset time. Make sure you
have set the clock (“Setting the clock” on
page 19).
Before you begin, make sure the
(clock)
indication is not lit in the display. If it is lit,
press STANDBY.
1 Prepare the music source you want to
play.
To play Do this
the radio Tune in a station.
a CD Insert a CD.
2 Press CLOCK/SLEEP/TIMER until
“TIMER” appears in the display, then
press ENTER.
The
(clock) indication flashes.
3 Set the timer to the hour you want the
music to start by turning the jog dial,
then press ENTER.
Set the minutes, then press ENTER.
ENTER
Jog dial
STANDBY
CLOCK/SLEEP/TIMER