Filter
Top Products
58
US
BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100
4-446-733-12(1)
D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100
(PMRF 06)\4446733121_US (U2)\100ADD.fm
masterpage: Left
Radio stations cannot be tuned in.
t Check that the antenna (aerial) is
connected securely. Adjust the antenna
(aerial).
t The signal strength of the stations is
too weak (when tuning in with
automatic tuning). Use manual tuning.
The disc does not play.
t The region code on the BD/DVD does
not match the system.
t Moisture has condensed inside the unit
and may cause damage to the lenses.
Remove the disc and leave the unit
turned on for about half an hour.
t The system cannot play a recorded disc
that is not correctly finalized
(page 60).
File names are not displayed
correctly.
t The system can only display ISO
8859-1 compliant character formats.
Other character formats may be
displayed differently.
t Depending on the writing software
used, the input characters may be
displayed differently.
A disc does not start playing from the
beginning.
t Resume play has been selected. Press
OPTIONS and select [Play from
beginning], then press .
Playback does not start from the
resume point where you last stopped
playing.
t The resume point may be cleared from
memory depending on the disc when
• you open the disc tray.
• you disconnect the USB device.
• you play other content.
• you turn off the unit.
The language for the soundtrack/
subtitle or angles cannot be changed.
t Try using the BD’s or DVD’s menu.
t Multi-lingual tracks/subtitles or multi-
angles are not recorded on the BD or
DVD being played.
Bonus contents or other data that are
contained in a BD-ROM cannot be
played.
t Try the following:
1 Remove the disc.
2 Turn the system off.
3 Remove and reconnect the USB
device (page 28).
4 Turn the system on.
5 Insert the BD-ROM with
BONUSVIEW/BD-LIVE.
The USB device is not recognized.
t Try the following:
1 Turn the system off.
2 Remove and reconnect the USB
device.
3 Turn the system on.
t Make sure that the USB device is
securely connected to the (USB)
port.
t Check if the USB device or a cable is
damaged.
t Check if the USB device is on.
Tuner
Playback
USB device