Filter
Top Products
To check the time remaining until the power is turned off
Press the SLEEP button once while pressing the SHIFT button. The remaining time is displayed for 4 seconds.
To cancel the sleep timer
Press the SLEEP button twice while pressing the SHIFT button so that "SLEEP" on the display disappears.
OTHER CONNECTIONS pg. 21
CONNECTING OPTIONAL EQUIPMENT
Refer to the operating instructions of the connected equipment for details.
• The connecting cords are not supplied. Obtain the necessary connecting cords.
• Consult your local Aiwa dealer for optional equipment.
VIDEO/AUX, MD JACKS
This unit can input analog sound signals through these jacks. Use a cable with RCA phono plugs to connect audio
equipment (turntables, LD players, MD players, VCRs, TV, etc.).
Connect the red plug to the R jack, and the white plug to the L jack.
When connecting a turntable
Use an Aiwa turntable equipped with a built-in equalizer amplifier.
LINE OUT JACKS
This unit can output analog signal through these jacks. Use a cable with RCA phono plugs to connect audio
equipment with LINE IN (analog input) jacks.
NOTE
Do not connect an equipment to the LINE OUT terminals and VIDEO/AUX terminals simultaneously. Otherwise,
noise is generated and malfunction occurs.
CD DIGITAL OUT (OPTICAL) JACK
This unit can output CD digital sound signals through this jack. Use an optical cable to connect digital audio
equipment (digital amplifier, DAT deck, MD recorder, etc.).