Filter
Top Products
1 Press the TUNER/BAND button repeatedly to select the desired band.
When the TUNER/BAND button is pressed while the power is off, the power is turned on directly.
To select a band with the remote control
Press the BAND button while pressing the SHIFT button.
2 Press the DOWN or UP button to select a station.
Each time the button is pressed, the frequency changes. When a station is received, "TUNE" is displayed for 2
seconds. During FM stereo reception, is displayed.
To search for a station quickly (Auto Search)
Keep the DOWN or UP button pressed until the tuner starts searching for a station. After tuning in to a
station, the search stops.
To stop the Auto Search manually, press the DOWN or UP button.
• The Auto Search may not stop at stations with very weak signals.
When an FM stereo broadcast contains noise
Press the MONO TUNER button while pressing the SHIFT button on the remote so that "MONO" appears on the
display.
Noise is reduced, although reception in monaural.
To restore reception, press these buttons so that MONO disappears.
PRESETTING STATIONS