Filter
Top Products
32
Playing Discs
Inserting Discs
You can insert up to 400 discs into this player.
1 Press [/1.
The player turns on.
2 Press OPEN/CLOSE.
The front cover opens.
3 Press DISC CHANGE.
The DISC CHANGE indicator lights up.
4 While checking the disc slot number
indicated on the front panel display or
by the slot, turn the .–/>+/
ENTER dial until you find the disc slot
where you want to insert a disc.
5 Insert a disc.
Gently place the disc all the way into the
slot and do not release the disc until it is
completely seated. Make sure you have
inserted the disc into each slot at a right
angle to the rotary table. If the disc is not
put in straight, it may damage the player
or the disc.
6 Repeat steps 4 and 5 to insert more
discs.
7 Press OPEN/CLOSE.
The front cover closes. The rotary table
turns and the disc slot selected in step 4 is
set to the playing position.
z Hint
In step 4, you can select a disc slot number by
skipping 10 slots. After sliding the TV/DISC
EXPLORER/DVD switch to DISC EXPLORER or
DVD, press DISC SKIP +/– on the remote. 10 disc
slots before or after the current disc slot number will
be skipped. To skip 100 slots, press +100 on the
player.
Notes
• Do not turn the turntable by hand.
• Do not reach inside of the turntable compartment.
Always follow the correct steps for inserting and
removing discs.
• When transporting the player, remove all discs
from the player. Failure to remove the discs may
cause damage to the player.
• When closing the front cover, be careful not to let
anything get caught between the door and the
player.
.–/>+ /ENTER dial
Front cover
[/1
OPEN/CLOSE
DISC CHANGE
+100
Disc slot
at the loading position
Disc slot number
With the playback side
facing left