Sony 480p CD Player User Manual


 
30
DOLBY DIGITAL (only if the
amplifier (receiver) has a Dolby Digital
decoder) (page 91)
13Press ENTER.
“DTS” is selected.
14Press X/x to select the type of
DTS signal sent to your amplifier
(receiver).
Choose the item that matches the audio
connection you selected on pages 24 to
26 ( through ).
D-PCM (page 91)
DTS (only if the amplifier (receiver)
has a DTS decoder) (page 91)
15Press ENTER.
When “DIGITAL OUT” is selected in
step 11
Quick Setup is finished and
connections are complete.
When “DIGITAL & 5.1CH OUTPUT” is
selected in step 11
The Setup Display for “SPEAKER
SETUP” appears.
16Press X/x to select the size of the
center speaker.
If no center speaker is connected, select
“NONE” (page 92).
17Press ENTER.
“REAR” is selected.
18Press X/x to select the size of the
rear speakers.
If no rear speaker is connected, select
“NONE.”
19Press ENTER.
“SUBWOOFER” is selected.
20Press X/x to select whether or
not you have connected a
subwoofer.
21Press ENTER.
Quick Setup is finished. All connections
and setup operations are complete.
Enjoying the surround sound
effects
To enjoy the surround sound effects of this
player or your amplifier (receiver), set the
following items as described below for the
audio connection you selected on pages 24 to
26 ( through ). Each of these is the
default setting and does not need to be
adjusted when you first connect the player.
See page 85 for using the Setup Display.
D-2
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
OFF
STANDARD
AUDIO FILTER: SHARP
ON
DOWNMIX:
DOLBY SURROUND
D-PCM
D-PCM
48kHz/96kHz PCM:
DTS
DTS:
D-PCM
B D
B-2 C-2
D-2
SPEAKER SETUP
SIZE:
DISTANCE:
BALANCE:
LEVEL:
OFF
TEST TONE:
FRONT:
CENTER:
NONE
SMALL
LARGE
LARGE
REAR:
SUBWOOFER:
To set press then
ENTER
LARGE
SPEAKER SETUP
SIZE:
DISTANCE:
BALANCE:
LEVEL
:
OFF
TEST TONE:
FRONT:
CENTER:
LARGE
REAR:
SUBWOOFER:
LARGE(REAR)
LARGE
LARGE(SIDE)
LARGE(REAR)
SPEAKER SETUP
SIZE:
DISTANCE:
BALANCE:
LEVEL:
OFF
TEST TONE:
FRONT:
CENTER:
LARGE
LARGE
REAR:
SUBWOOFER:
To set, press , then .
To quit press
ENTER
ENTER
SETUPDISPLAYDISPLAY
YES
YES
NONE
LARGE
(
REAR
)
B D