Filter
Top Products
CMT-HX80R.GB.3-452-364-11(1)
19
GB
Basic Operations
Listening to music of
an USB device
You can listen to music stored in the USB
device.
e audio formats that can be played
back by this system are as follows:
MP3*/WMA*/AAC*
See “Compatible USB devices with this
system” (page 35) for a list of USB devices
that can be connected to this system.
* Files with copyright protection (Digital
Rights Management) cannot be played by
this system.
Files downloaded from an online music store
may not be played by this system.
1
Select the USB function.
Press FUNCTION +/ (or
FUNCTION on the unit)
repeatedly.
2
Connect an optional USB device
to the (USB) port
.
When the USB device is connected,
the display changes as follows:
“Reading”
“Storage Drive*”
* When connecting an USB storage device,
the volume label is displayed next if
recorded.
Note
It may take about 10 seconds before
“Reading” appears depending on the type
of USB device connected.
3
Start playback.
Press (or USB on the unit)
.
4
Adjust the volume.
Press VOLUME +/ (or turn the
VOLUME control on the unit)
.
Other operations
To Press
Pause playback (or USB on
the unit)
. To resume
play, press the button
again.
Stop playback
. To resume
play, press (or
USB on the unit)
1)
. To cancel resume
play, press
again.
Select a folder
+/
.
Select a le /
.
Select a folder
and le while
viewing the
folder and le
names on the
system display
2)
SEARCH
on the
unit. Press /
to select the desired
folder, then press (or
ENTER on the unit)
. Press /
to select the desired
le, then press (or
ENTER on the unit)
.
Find a point in
a le
Hold down /
during playback,
and release the button
at the desired point.
Select Repeat
Play
REPEAT
repeatedly
until “REP” or “REP1”
appears.
Remove the
USB device
Hold down
on
the unit until “No
Device” appears, then
remove the USB device.
1)
When playing a VBR MP3/WMA le,
the system may resume playback from a
dierent point.
2)
You can search by dierent information such
as album or genre for digital music players.
Continued