Filter
Top Products
20
GB
Getting Started
Before connecting the AC power cord (mains lead) of the unit to a wall outlet (mains), connect all the
speakers to the unit.
Also, connect the AC power cord (mains lead) of the S-AIR receiver to a wall outlet (mains).
After connecting the AC power cord (mains lead), the demonstration appears in the front panel display.
Setting the demonstration mode to on/off
1 Press [/1 on the unit.
The system turns on.
2 Press SYSTEM MENU.
3 Press X/x repeatedly until “DEMO” appears in the front panel display, then press or
c.
4 Press X/x to select a setting.
• “DEMO ON”: On.
• “DEMO OFF”: Off.
5 Press .
The setting is made.
6 Press SYSTEM MENU.
The system menu turns off.
Ti
p
• When you purchase the system from new, or if the system is at its factory default settings (ex., after performing
“COLD RESET” (page 83)), you can turn off the demonstration simply by pressing [/1 on the remote.
6 Connecting the AC power cords (mains leads)
About the demonstration
CENTER SUBWOOFER
DIGITAL IN
COAXIAL OPTICAL
FRONT R FRONT L SUR R SUR L
SPEAKER
TV HDMI OUT
SPEAKER
EURO AV
OUTPUT(TO TV)
COAXIAL 75
AM
FM
ANTENNA
DMPORT
DC5V
0.7A MAX
EZW-RT10
Rear panel
To the wall outlet (mains)