Filter
Top Products
31
GB
Getting Started
When warning codes appear
During Auto Calibration, the warning code
provides information on the measurement
result. The warning code will appear on the
display cyclically as follows:
Warning code t blank display t (warning
code t blank display)
b)
t PUSH t blank
display t ENTER
b)
Appears when there are more than one warning
code.
You can choose to ignore the warning code as
the Auto Calibration function will
automatically adjust the settings. You can also
change the settings manually.
To change the settings
manually
1 Record down the warning code.
2 Press .
3 Press ?/1 to turn off the receiver.
4 Follow the solution provided in the
“Warning code and solution” below.
5 Turn on the receiver and perform Auto
Calibration again (page 29).
Warning code and solution
c)
For details, refer “Front speakers distance”
(page 44).
d)
For details, refer “Tip” on page 45.
Warning
code
Explanation and solution
WARN. 40 The environment is noisy. Make sure
the environment is quiet during Auto
Calibration.
WARN. 50 The center speaker is not connected.
Be sure to connect the center speaker.
WARN. 51 The surround speakers are not
connected. Be sure to connect the
surround speakers.
WARN. 60 The front speaker balance is out of
range. Reposition your front
speakers.
c)
WARN. 62 The center speaker level is out of
range. Reposition your center
speaker.
d)
WARN. 63 The surround left speaker level is out
of range. Reposition your surround
left speaker.
d)
WARN. 64 The surround right speaker level is
out of range. Reposition your
surround right speaker.
d)
WARN. 70 The front speaker distance is out of
range. Reposition your front
speakers.
c)
WARN. 72 The center speaker distance is out of
range. Reposition your center
speaker.
d)
WARN. 73 The surround left speaker distance is
out of range. Reposition your
surround left speaker.
d)
WARN. 74 The surround right speaker distance is
out of range. Reposition your
surround right speaker.
d)