Sony 3-283-375-11(2) Home Theater System User Manual


 
19
GB
Getting Started
Notes
Be sure to turn on the receiver when the video and
audio signals of a playback component are being
output to a TV via the receiver. Unless the power is
turned on, neither video nor audio signals will be
transmitted.
When connecting optical digital cords, insert the
plugs straight in until they click into place.
Do not bend or tie optical digital cords.
Tips
To output the sound of the TV from the speakers
connected to the receiver, be sure to
connect the audio output jacks of the TV to the
TV IN jacks of the receiver.
turn off the TV’s volume or activate the TV’s
muting function.
All the digital audio jacks are compatible with
32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling
frequencies.
4a: Connecting the audio
components
The following illustration shows how to
connect a Super Audio CD player, CD player
or CD recorder. Before connecting cords, be
sure to disconnect the AC power cord.
After connecting your audio component,
proceed to “4b: Connecting the video
components” (page 20).
Connecting a Super Audio CD/
CD player/CD recorder
AM
HDMI
SAT IN DVD IN BD IN
IN
DIGITAL
(ASSIGNABLE)
DMPORT
OPTICAL
OPTICAL
SAT
IN
DVD
IN
COAXIAL
ANTENNA
IN
TV
TV
SUB WOOFER
AUDIO
IN
VIDEO
IN
SAT
MONITOR
AUDIO
IN
VIDEO
IN
AUDIO
IN
VIDEO
IN
DVD
AUDIO
OUT
AUDIO
OUT
VIDEO
OUT
VIDEO
OUT
SAT IN
VIDEO 1
DC5V
0.7A MAX
SA-CD
/
CD
/
CD-R
R
OUT IN
L
Super Audio
CD player/
CD player/
CD recorder
AAudio cord (not supplied)
A