Filter
Top Products
18
The timer enables you to switch the system on or off at
specific times.
Example:
You wish to wake up to music every morning.
If you no longer want the system to be switched on or off
automatically, you must cancel the timer.
Before setting the timer, check that the current time is correct.
For each step, you have a few seconds to set the required options.
If you exceed this time, you must start again.
Switch the system on by pressing
On/Standby ( )
.
Press
Timer/Clock
until
TIMER
is displayed.
Press
Program/Set
.
Result:
ON TIME
is displayed (instead of the equalizer symbols) for a
few seconds, followed by the switch-on time already set. You
can now set the timer switch-on time.
Set the timer switch-on time.
a
Set the hour by pressing and .
b
Press
Program/Set
.
Result: The minutes flash.
c
Set the minutes by pressing and .
d
Press
Program/Set
.
Result:
OFF TIME
is displayed (instead of the equalizer symbols)
for a few seconds, followed by the switch-off time already
set. You can now set the timer switch-off time.
Set the timer switch-off time.
a
Set the hour by pressing and .
b
Press
Program/Set
.
Result: The minutes flash.
c
Set the minutes by pressing and .
d
Press
Program/Set
.
Result:
VOL 10
is displayed, where
10
corresponds to the
volume already set.
Press and to adjust the volume level and press
Program/Set
.
Result: The source to be selected is displayed.
Press and to select the source to be played when the
system switches on.
If you select... You must also...
TAPE (cassette) Insert a cassette tape.
TUNER (radio)
a
Press
Program/Set
.
b
Select a preset station by pressing
and
.
CD (compact disc) Load a compact disc.
Press
Program/Set
to confirm the timer.
Press
on/stanby ( )
to set the system to standby mode.
Result: is displayed to the bottom left of the time, indicating that
the timer has been set. The system will switch on and off
automatically at the required times.
If the timer switch on and off times are identical, the word
ERROR
is displayed.
You can also use
Multi Jog
of the
/ buttons in
Steps 4, 5, 6, 7
.
Timer Function
7
8
9
5
6
1
2
3
4
After having set the timer, it will start automatically as shown by the
TIMER indication on the display. If you no longer wish to use the
timer, you must cancel it.
You can stop the timer at any time (with the system on or in standby
mode).
To... Press Timer On/Off...
Cancel the timer Once.
Result: is no longer displayed.
Restart the timer Twice.
Result: is displayed again.
Cancelling the Timer
2
3,4,5,6,7,8
4,5,6,7
4,5,6,7
1,9