Filter
Top Products
9
The AM antenna can be:
Placed on a stable surface
Fixed to the wall (you must first remove the base)
The
AM
antenna connector terminals are located on the rear of the system and are marked
AM ANT
.
To avoid noise interference, check that the speaker wires do not run close to the
antenna wires. Always keep them at least 2 inches (5 cm) apart.
Connecting the AM Antenna
Connect a 75ž antenna to the
FM
antenna terminal.
Plug the connector on the supplied
FM
antenna into the coaxial socket (75ž) marked
FM
on the rear of the system.
Follow the instructions on
Page 15
to tune into a radio station, and determine the best position for the antenna.
If reception is poor, you may need to install an outdoor antenna.
To do so, connect an outdoor
FM
antenna to the
FM
socket on the rear of the system using a 75ž coaxial cable (not supplied).
Connecting the FM Antenna