Filter
Top Products
14
You can check or change your selection of programmed tracks at any
time.
Press once if you have started listening to the selection.
Press
Program/Set
.
Result: The following is displayed:
(01 = Program no., – – = Track no. on the disc)
If you have already programmed 24 tracks,
Check
is displayed
instead of
PR
when you press
Program/Set
.
Press
Program/Set
one or more times until the track to be changed
is displayed.
Press / or turn
Multi Jog
to select a different track.
Press
Program/Set
to confirm your change.
Press
CD
( ) to start listening to the selection.
Result: The first track selected is played.
1
2
3
4
5
6
You can decide:
the play order of the tracks
to skip certain tracks
The play order of up to 24 may be programmed.
If the CD function is selected, stop the player by pressing .
Load the selected CD.
Press
Program/Set
.
Result: The following indications are displayed:
(01 = Program no., – – = Track no. on the disc)
Select the required track by pressing:
to move back through the tracks
to move forward through the tracks
Press
Program/Set
to confirm your selection.
Result: The selection is stored and is displayed.
To select other tracks, repeat Steps
3-5
.
Press
CD
( ) to listen to the tracks in the order programmed.
To... Press...
Listen to the current track again
once
Listen to the previous track
twice
Listen to the next track
once
Skip forwards or backwards
or the appropriate
number of times
To cancel the selection, press .
Press once if the compact disc player is stopped.
Result:
PRGM
is no longer displayed.
If you open the disc compartment, the selection is cancelled.
8
9
7
Programming the Order of Playback
1
2
3
4
5
6
1,9
7
4,8 4,8
3,5
Checking or Changing Programmed
Tracks
6
2,3,5
1
4
4
1
4
4
4
*This function does not operate while using an MP3-CD.