Filter
Top Products
10
Your system is equipped with a clock, which allows you to turn your
system on and off automatically.
You should set the clock:
When you first purchase the Executive Shelf System
After a power failure
After unplugging the unit
For each step, you have a few seconds to set the required options.
If you exceed this time, you must start over.
Switch the system on by pressing
On/Standby ( ) on the
remote
.
Press
Timer/Clock
twice to display
CLOCK
.
Press
Program/Set
to display the flashing hour.
To... Press...
Increase the hours
Decrease the hours
When the correct hour is displayed, press
Program/Set
.
Result: The minutes will then flash.
To... Press...
Increase the minutes
Decrease the minutes
When the correct time is displayed, press
Program/Set
.
Result: The clock starts and is displayed.
You can display the time, even when you are using another func-
tion, by pressing
Timer/Clock
once.
You can use the
Multi Jog
dial instead of the
/ buttons in
Steps 4,6.
Setting the Clock
1
2
3
4
5
6
7
You can view the various functions available on your system.
Press the
Demo
button.
Result: The various functions available are listed in turn on the
display.
All these functions are described in detail in this guide.
For instructions on how to use them, refer to the appropriate sec-
tions.
To cancel this function, press
Demo
again.
2
1
Viewing the Various Functions on Your
System
4,6
1
3,5,7
4,6
2