Filter
Top Products
30
Fault
No Sound
No signal on SR200 display
Audio static or loss of clarity
Antenna Not Detected
display message
SR200 does not turn on
The audio cables are not connected.
The car radio is set on the wrong
frequency.
Check for obstacles over or around
antenna.
FM Frequency contains static.
Vehicle antenna not connected to the
radio.
Satellite antenna not connected. The
antenna or cable is faulty.
Blown Fuse, power cable not properly
connected.
Check the audio cables.
Check the car radio’s frequency.
Change location to eliminate
interference from nearby
objects.
Switch to another FM
frequency.
Check the vehicle antenna
cable.
Check satellite connection to
the SR200.
Contact the system installer or
vendor.
Check fuse, check power cable.
Possible Cause Solution
Troubleshooting