Filter
Top Products
[ Installation ]
11
Connecting the AC Power Cord
Connect the AC power cord to the AC power connector at the rear of the tuner, and plug it
into a wall outlet. (Refer to Figure 1 on page 8.)
Installing the Outdoor Antenna
Before installing the outdoor antenna, read this entire section.
A successful antenna installation consists of three steps: First, determining a location for the
antenna; Second, choosing a mounting option; and Third, adjusting and aiming the antenna.
Please read the following three sections before beginning the antenna installation so that you
understand the entire installation process.
You will need to purchase two RG-6 cables to complete the installation of the antenna. These
cables are the same as the cables used for cable TV installations, and may be purchased from
your local hardware store, home center, or electronics retailer. RG-6 cable is typically sold in
lengths of 25, 50, or 100 ft., all with “F” type connectors on each end.
Figure 3 shows the two cables you will need to purchase. The length of cable 2 cannot
exceed 50 ft., and the overall length of both cables cannot exceed 150 ft.
RG-6 Cable
Outdoor
Antenna
Splitter
50’ MAX.
150’ MAX.
Terminator
1
RG-6 Cable
2
Figure 3Figure 3