Silvercrest KH 2311 Stereo System User Manual


 
- 6 -
To activate the radio function keep pressing the > FUNCTION
button on the device and/or on the remote control until
appears in the display.
Select with the button > /
PLAY/PAUSE/BAND the
desired frequency band FM or AM.
With the help of the >
TUNING controller set the radio sta-
tion. Turn the controller in a clockwise direction to select
stations with a higher broadcast frequency than the one
currently shown in the display.
Turn the >
TUNING controller in a counter clockwise direc-
tion to select stations with a lower broadcast frequency
than the one currently shown in the display.
If the device receives VHF transmissions in stereo the LED >
STEREO lights up on the device.
Should the stereo reception become noisy press the >
STOP/FM MO/ST. button on the device and/or the
STOP/FM MONO/ST. button on the remote control
to switch to mono reception. The LED Stereo
goes out and
S-OFF appears briefly in the display.
Press the button >
STOP/FM MO/ST. on the device and/
or the button
STOP/FM MONO/ST. on the remote con-
trol again to switch back to stereo reception. S-ON appears
briefly in the display.
Operating the CD player
The device plays audio CDs (CD-A) and MP3/WMA CDs.
Both pressed and blank discs burnt on the computer of the
format CD-R and CD-RW are supported. Because of the many
different kinds of blank discs, computer types, operating systems,
burning software and burning processes we are not able to
guarantee that every "burnt" disc will playback faultlessly.
Inserting a CD
Switch the Micro system on with the >
STANDBY button
on the device or with the STANDBY/ON button on the
remote control.
To activate the CD function keep pressing the >
FUNCTION
button on the device and/or on the remote control until the
notice "CD" appears in the display.
To open the CD compartment press carefully on the spot >
marked "
OPEN/CLOSE" on the CD compartment lid. The
lid will open.
Place the CD with the marked side up pointing towards the >
arbor of the CD disc in the CD tray.
Press the CD lightly downwards until it locks firmly onto the >
arbor.
To close the CD compartment push the lid down, by hand, >
and allow it to lock into place by carefully pressing on the
spot marked "
OPEN/CLOSE".
The device will now read the CD. Subsequently the number of
the CD title appears in the display. Playback of the CD starts
automatically and in the display is shown the number of the
currently playing title, the playback symbol as well as "CD".
Playback stop/resume
During playback press the > /
PLAY/PAUSE/BAND
button on the device and/or on the remote control to stop
playback. With stopped CD playback the number of the
currently playing title and the pause symbol blink in the
display.
To resume playback press the > /
PLAY/PAUSE/BAND
button once more.
Next/previous title
To playback the next title of a CD press the button >
SKIP/
SEARCH on the device and/or on the remote control.
To playback the previous title of a CD press twice briefly >
in succession the
SKIP/SEARCH button on the device
and/or on the remote control.
Search forward and backward
You can activate a search to look for specific passages within
a title. During the search no sound will play.
For this, during playback, hold down the button >
SKIP/SEARCH (Search forward) and/or the button
SKIP/SEARCH (Search backwards) until the desired
location in the title is reached.
Stopping playback
Press the >
STOP/FM MO/ST. button on the device and/
or
STOP/FM MONO/ST. on the remote control.
Removing the CD
To open the CD compartment press carefully on the spot >
marked "
OPEN/CLOSE" on the CD compartment lid.
The lid will open.
Remove the CD. >
To close the CD compartment push the lid down, by hand, >
and allow it to lock into place by carefully pressing on the
spot marked "
OPEN/CLOSE".
Switching on the repeat function
With the repeat function you can repeat play individual titles
or all the titles of a CD.
To repeat an individual title press, before or during play- >
back, the
PLAY MODE button on the device and/or on the
remote control.
The prompt
appears in the display.
To repeat all titles of a CD press twice the button >
PLAY
MODE on the device and/or on the remote control.
The notice
ALL appears in the display.
To end repeat playback keep pressing the button >
PLAY
MODE on the device and/or on the remote control until
the notices
ALL and RAND go out.
Playing back titles in random order
Press three times the button >
PLAY MODE on the device
and/or on the remote control. The notice "RAND" appears
in the display. The titles on the CD will be played back
from now on in random order.
Press the button >
PLAY MODE on the device and/or on the
remote control again in order to switch off the function.