Filter
Top Products
- 9 -
Winding the cassette forward and backward
Note: Only use the wind function when the tape is
stopped otherwise the tape could be damaged.
Press the cassette key >
to wind the tape forwards.
Press the cassette key >
to wind the tape backwards.
Press the key >
to stop winding.
Cassette recording
You have the potential of recording onto a cassette radio pro-
grammes, CDs, MP3/WMA files from USB memory mediums
or the audio signal of a device connected to the
LINE IN
socket.
Tune to the desired station and/or place the desired CD >
into the CD tray. Connect an MP3 player, for example, to
the
LINE IN socket or plug in the USB memory medium.
Start playback of the corresponding audio source. >
When you want to start the recording press the cassette >
key
. The keylocks at the same time.
When you want to stop recording press the cassette key >
.
Observe copyright laws!
When recording cassettes from CDs, USB memory mediums
or copying radio transmissions be aware of the copyright
regulations of the country, in which the device is to be used.
Line In operation
You can playback audio signals from other devices, for exam-
ple an MP3 player, via the Micro system.
Connect the audio output of, for example, the MP3 player >
via a 3.5 mm jackplug lead (not supplied) to the
LINE IN
socket on the Micro system.
Switch the Micro system on with the >
STANDBY button
on the device or with the STANDBY/ON button on the
remote control.
Press repeatedly the button >
FUNCTION on the device
and/or on the remote control until the notice LINE appears
in the display.
Begin playback of the connected device. >
Setting the alarm wake time
With the Micro system you can be awakened by a radio
programme, from the sound of a CD, a USB memory medium
or with a signal tone. For this you can programme two wake
times.
Note: If you want to be woken by a CD or a USB mem-
ory medium insert/plug in beforehand the corresponding me-
dium. If no medium is inserted/ plugged in the Micro system
automatically wakes with a signal tone. You can only set the
wake time in standby mode.
Press and hold the button >
AL. SET/OFF ቢ or ባ on the
remote control until the notice
and/or
appears in
the display and the hour indicator blinks.
Press the button >
SKIP/SEARCH or SKIP/SEARCH
on the device and/or on the remote control to set the hour.
Press the button >
AL. SET/OFF ቢ or ባ to save the setting.
Press the button >
SKIP/SEARCH or SKIP/SEARCH
on the device and/or on the remote control to set the min-
utes.
Press the button >
AL. SET/OFF ቢ or ባ to save the setting.
The operation mode
blinks in the display.
Press the button >
SKIP/SEARCH or SKIP/SEARCH
on the device and/or on the remote control to set the de-
sired mode of operation (RADIO, CD, USB or BUZZER).
Press the button >
AL. SET/OFF ቢ or ባ to save the setting.
The alarm volume blinks in the display.
Press the button >
SKIP/SEARCH or SKIP/SEARCH
on the device and/or on the remote control to set the de-
sired alarm volume.
Press the button >
AL. SET/OFF ቢ or ባ to save the setting.
The time of day is shown again in the display. The notice
and/or
is an indication that the wake function is
activated.
If you want to deactivate the wake function press, briefly, >
the button
AL. SET/OFF ቢ or ባ. The notice
and/or
goes out.
If you want to activate the wake function again with the >
previously set parameters press, briefly, the button
AL. SET/
OFF ቢ or ባ. The notice
and/or appears again in
the display.