Filter
Top Products
55
ENGLISH
■To resume its factory input source name
• Enter a blank on each digit.
• The name is stored in the memory.
■To clear the name you entered
• Press the CURSOR LEFT button to select the Cancel, then press the ENTER button.
• Then the cursor moves to the desired digit.
• You can enter the desired among blank, A~Z, a~z, 0~9, (, ),
+, ,, ― , ., /.
3. Press the CURSOR LEFT/RIGHT buttons to select the desired digit.
6. To confirm your entry, press the CURSOR RIGHT button to select the Finish, then press the ENTER button.
4. Press the CURSOR UP/DOWN buttons to enter the desired character on the selected digit.
5. Repeat the above steps 3 and 4 to enter the desired characters on the rest of the digits.
Continued
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 55