Filter
Top Products
35
ENGLISH
• ROOM 2 ~ is displayed for several seconds.
• Each time the button is pressed, the ROOM 2 mode
changes as follows :
ON : To turn on the ROOM 2 function.
↕ ("R2" lights up.)
OFF : To turn it off. ("R2" goes off)
■Note :
• When ROOM 2 mode is set to OFF, the ROOM 2 volume
cannot be selected.
• Each time the “INPUT” button is pressed, the ROOM 2
input can be selected among MAIN source, TUNER, CD,
F.AUX, TAPE, VIDEO 1 ~ VIDEO 4 as a ROOM 2 source.
• You can adjust the volume on the power amplifier
assigned to “Surr Back↔Room 2” or “Room 2”. (For
details, refer to “When selecting the AMP ASSIGN” on
page 41.)
1. Turn on the ROOM 2 function.
2. Select the desired input as a ROOM 2 source.
3. Adjust the ROOM 2 volume.
4. Start play on the component related to the ROOM 2 source.
When using the buttons on the remote control unit
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 35