Filter
Top Products
ENGLISH
52
■When selecting the HDMI Assign
• You should assign the connected HDMI INs to the desired of VIDEO 1 ~ VIDEO 4, EXT.IN.
(For details, refer to "CONNECTING VIDEO COMPONENTS" on pages 5 ~ 6.)
• You can select the desired of HDMI 1 ~ HDMI 3.
■Note :
• In such a case that a HDMI IN is assigned to two input sources or more, when these input sources are selected, the
uncompressed digital video signals (and digital audio signals when the HDMI Audio Output is set to HDMI Passthrough) input
into the same HDMI IN can be output from the HDMI MONITOR OUT of this receiver.
■When selecting the Component Assign
• You should assign the connected COMPONENT VIDEO INs to the desired of VIDEO 1 ~ 4, EXT.IN.
(For details, refer to "CONNECTING VIDEO COMPONENTS" on pages 5 ~ 6.)
• You can select the desired of Component 1 ~ 2.
■Note :
• In such a case that a COMPONENT VIDEO IN is assigned to two input sources or more, when these input sources are
selected, the component video signals can be viewed from the same COMPONENT VIDEO IN.
■When selecting the Audio Assign
• You should assign the connected DIGITAL INs to the desired of CD, F.AUX and VIDEO 1 ~ VIDEO 4, EXT.IN.
(For details, refer to "CONNECTING DIGITAL INS AND OUT" on page 7.)
• You can select the desired of Optical 1 ~ 2 and Coaxial 1 ~ 2.
■Note :
• In such a case that a DIGITAL IN is assigned to two input sources or more, when these input sources are selected, the digital
audio signals can be heard from the same DIGITAL IN.
■When selecting the Video Mode
• Depending on the Video Mode settings, the video input signal can be converted and output from the HDMI MONITOR OUT.
Auto : When there are multiple video input signals, the video input signals are detected and the video input signal to be output
from the HDMI MONITOR OUT is selected automatically in the priority order of them :
"HDMI" > "COMPONENT" > "S-VIDEO" > "(composite) VIDEO"
HDMI : The signal that is input into the HDMI IN connector is always played. The HDMI video input signal is output from the
HDMI MONITOR OUT only.
Component : The signals that are input into the COMPONENT IN jacks are always played.
The component video signals are converted and output from the HDMI MONITOR OUT.
S-Video : The signal that is input into the S-VIDEO IN jack is always played.
The S-Video signal is converted and output from the HDMI MONITOR OUT.
Composite : The signal that is input into the (composite) VIDEO IN jack is always played.
The composite video signal is converted and output from the HDMI MONITOR OUT.
Continued
↕
↕
↕
↕
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 52