Filter
Top Products
ENGLISH
40
SETTING THE SYSTEM SETUP
• AMP Assign : To assign the surround back channels' power
amplifier correctly depending on how to use the
speakers.
• Subwoofer Mode : To select the desired subwoofer mode.
• HDMI Audio Output : To output the digital audio signals from the
HDMI MONITOR OUT connector.
• Tone Control : To adjust the tone (bass and treble) as desired.
• Cinema EQ : To select the desired cinema EQ mode.
• Momentary OSD : To turn on or off the OSD that shows the
status corresponding to each operation
momentarily.
• Save/Recall : To memorize all the OSD menu setting values into
memory or to recall the memorized setting values.
1. Press the CURSOR UP/DOWN buttons to select the desired item, then press the CURSOR RIGHT button to
enter its setting menu.
2. Press the CURSOR UP/DOWN buttons to set the selected item as desired, then press the ENTER button.
• Then the setting value is marked with “ ”.
• When the CURSOR LEFT(◀) button is pressed on a
setting menu, the previous menu will be returned to.
Amp Assign
Subwoofer mode
HDMI Audio Output
Tone Control
Bass
Treble
Cinema EQ
Momentary OSD
Save/Recall
BACK NEXT
OK
RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 40