Filter
Top Products
43
TONE DEFEAT :
Off
TONE CONTROL
RETURN:Back , :Select
BASS
-----
+
-----
0 dB
TREBLE
-----
+
-----
0 dB
OFF
OSD
POWER
MAIN
P
AG
E
FAV
MUTE
CH/
SET
VOL
RETURN
DISC
DISP
MI
ROOM 2
1
STEREO
7.1
SURR
CH
2
3
4
5
6
7
8
9
0
ENT
M2
M3
AUTO DSP
RNC-500
Press the CURSOR UP()/DOWN() buttons to select the TONE CONTROL, then press the ENTER
button.
1
When selecting the TONE CONTROL
ENGLISH
Note:
When the source direct function is activated, the TONE CONTROL cannot be selected.
Each time these buttons are pressed, the tone defeat mode
changes as follows:
On : Select this when listening to a program source without
the tone effect.
Off : Select this when adjusting tone for your taste .
Note :
When the tone defeat mode is set to On, the tone (bass and
treble) cannot be adjusted.
Press the CURSOR LEFT()/RIGHT() buttons to select the desired tone defeat mode.
2
When the tone defeat mode is set to Off to adjust the tone (bass and treble)
1. Press the CURSOR UP()/DOWN() buttons to select the desired tone mode.
Each time these buttons are pressed, “” is moved to the tone defeat mode or the corresponding tone mode.
2. At the desired tone mode, press the CURSOR LEFT()/RIGHT() buttons to adjust the selected tone as desired.
The tone level can be adjusted within the range of -10~+10 dB.
In general, we recommend the bass and treble to be adjusted to 0 dB(flat level).
Extreme settings at high volume may damage your speakers.
3. To complete tone adjustment, repeat the above steps 1 and 2.
OFF
OSD
POWER
MAIN
PAGE
FAV
MUTE
CH/
SET
VOL
RETURN
DISC
DISP
MI
ROOM 2
1
STEREO
7.1
SURR
CH
2
3
4
5
6
7
8
9
0
ENT
M2
M3
AUTO DSP
RNC-500