Filter
Top Products
ENGLISH
38
LISTENING TO RADIO BROADCASTS
Auto tuning
• Each time this button is pressed, the band
changes as follows :
→ FM STereo → FM MONO → AM → XM
("ST" lights up) ("ST" goes off)
• When FM stereo broadcasts are poor because of
weak broadcast signals, select the FM mono
mode to reduce the noise, then FM broadcasts
are reproduced in monaural sound.
• To listen to XM Satellite Radio, select XM mode.
(For details, refer to "XM Satellite Radio (only for
North America)" on page 40.)
• Manual tuning is useful when you already know
the frequency of the desired station.
• After selecting the desired band, press the
TUNING UP(+) / DOWN(-) buttons repeatedly until
the right frequency has been reached.
Manual tuning
• Auto presetting function automatically searches
for FM stations only and store them in the
memory.
• While listening to FM or AM radio
broadcasts, press and hold down
the MEMORY/ENTER button for
more than 2 seconds.
• Then "AUTO MEM" flickers and
this receiver starts auto presetting.
• Up to 30 FM stations can be
stored.
�Notes:
• FM stations of weak strength cannot be
memorized.
• To memorize AM stations or weak stations,
preform "Manual presetting" procedure with using
"Manual tuning" operation.
Auto presetting
• The tuner will now search until a station of
sufficient strength has been found. The display
shows the tuned frequency and "TUNED".
• If the station found is not the desired one, simply
repeat this operation.
• Weak stations are skipped during auto tuning.
1. Select the desired band.
2. Press the TUNING UP(+)/DOWN(-) buttons for
more than 0.5 second.
R-772(A) 2007.8.20 10:2 AM 페이지 38