Sharp XL-UH12H Stereo System User Manual


 
E-8
Notes:
SHARP will not be held liable for the loss of data whilst
the USB memory device is connected to the audio
system.
Files compressed in MP3 and/or WMA format can be
played back when connected to the USB terminal.
This USB memory’s format supports FAT 16 or FAT 32.
SHARP cannot guarantee that all USB memory
devices will work on this audio system.
USB cable is not recommended for use in this audio
system to connect to USB memory device. Use of the
USB cable will affect the performance of this audio
system.
This USB memory cannot be operated via USB hub.
The USB terminal in this unit is not intended for a PC
connection but is used for music streaming with a USB
memory device.
External HDD-storage cannot be played back via USB
terminal.
If the data inside the USB memory is large, it may take
longer time for the data to be read.
This product can play WMA and MP3 files. It will
automatically detect the file type being played. If
unplayable file is played on this product, the file will be
automatically skipped. This will take a few seconds. If
abnormal indications appear on the display due to the
unspecified file, turn off the unit and then turn it on
again.
This product relates to USB mass storage devices and
MP3 players. It may however face some irregularities
due to various unforeseen reasons from some devices.
Should this happen, turn off the unit and then turn it on
again.
The USB port is only intended for direct connection to
a USB memory device without any cable.
This unit only supports “MPEG-1 Audio Layer-3”
format. (Sampling Frequency is 32, 44.1, 48kHz)
“MPEG-2 Audio Layer-3”, “MPEG-2.5 Audio Layer-3”
and MP1, MP2 format are not supported.
Playback order for MP3 files may differ depending on
the writing software used during file download.
Bitrate which is supported by MP3 is 32~320 kbps,
WMA is 64~160 kbps.
For MP3/WMA files, please put “.MP3” “.WMA”
extensi on. Files cannot be played back if there is no
MP3/WMA extension.
Playlists are not supported on this unit.
This unit can display Folder Name or File Name up to
16 characters.
Maximum total number of MP3/WMA files is 65280.
Maximum total number of folders is 255 inclusive of
root directory.
Folders with non playable files are also counted.
The display playback time may not be displayed
correctly when playing back a variable bitrate file.
The ID3TAG information supported are TITLE, ARTIST
and ALBUM only. Title name, artist name and album
name can be displayed by pressing the DISPLAY
button during file playback or pause mode.
WMA meta tag also supports title, artist and album
name which are recorded in WMA files. Copyright
protected WMA files cannot be played back.
Notes:
When radio interference occurs, auto scan tuning may
stop automatically at that point.
Auto scan tuning will skip weak signal stations.
Listening to USB mass storage device/MP3 player (continued)
To remove USB memory device
1
Press the button to stop playback.
2 Press the button again and wait until “OK” is
displayed.
3 Disconnect USB memory device from the USB terminal.
Listening to the radio
Tuning
1
Press the ON/STAND-BY button to turn the power on.
2 Press the FUNCTION button repeatedly to select FM
ST (FM stereo) or FM Mono.
3 Manual and Auto tuning to the desired station.
Manual tuning:
Press the TUNING ( or ) button on the remote
control repeatedly to tune in to the desired station.
Auto tuning:
When the TUNING ( or ) button on the remote
control is pressed for more than 0.5 seconds,
scanning will start automatically and the tuner will
stop at the first receivable broadcast station. Press
the button again to stop the auto tuning.