Sharp XL-UH12H Stereo System User Manual


 
E-15
As part of our policy of continuous improvement, SHARP
reserves the right to make design and specification
changes for product improvement without prior notice. The
performance specification figures indicated are nominal
values of production units. There may be some deviations
from these values in individual units.
Specifications
General
Power source AC 220 - 240 V ~ 50/60 Hz
Power
consumption
Power on: 18 W
Power stand-by: 0.4 W (*)
Dimensions Width: 180 mm (7 - 3/32")
Height: 121 mm (4 - 49/64")
Depth: 239 mm (9 - 13/32")
Weight 1.60 kg (3.53 lbs.)
(*) This power consumption value is obtained when the
main unit is in stand-by mode.
Amplifier
Output power MPO: 16 W (8 W + 8 W) (10% T.H.D.)
RMS: 10 W (5 W + 5 W) (10% T.H.D.)
Output
terminals
Speakers: 8 ohms
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Input terminals AUDIO IN (Analogue input):
500 mV/47 k ohms
CD player
Type Single disc multi-play compact disc
player
Signal
readout
Non-contact, 3-beam
semiconductor laser pickup
D/A converter Multi bit D/A converter
Frequency
response
20 - 20,000 Hz
Dynamic
range
90 dB (1 kHz)
USB
USB host
interface
Complies with USB 1.1 (Full
Speed)/ 2.0 Mass Storage Class.
Support Bulk only and CBI
protocol.
Support file
MPEG 1 Layer 3
WMA (Non DRM)
Bitrate support
MP3 (32 ~ 320 kbps)
WMA (64 ~ 160 kbps)
Other
Maximum total number of MP3/
WMA files is 65280.
Maximum total number of folders
is 255 INCLUSIVE of root
directory.
The ID3TAG information
supported are TITLE, ARTIST and
ALBUM only.
Supports ID3TAG version 1 and
version 2.
File system
support
Support USB devices with
Microsoft Windows/DOS/FAT 12/
FAT 16/ FAT 32.
2 kbyte block length for sector.
Tuner
Frequency range FM: 87.5 - 108 MHz
Speaker
Type 1-way type speaker system
9 cm (3 - 35/64") Full range
Maximum input
power
10 W
Rated input power 5 W
Impedance 8 ohms
Dimensions Width: 110 mm (4 - 21/64")
Height: 195 mm (7 - 11/16")
Depth: 149 mm (5 - 7/8")
Weight 0.98 kg (2.16 lbs.)/each